![]() Power off the supply before continuing to the next step. ![]() Carefully touch the test lead to the Input 1 terminal and confirm the indicator LED for Input 1 turns on.ĥ. Power on the supply and confirm the LEDs briefly light.Ĥ. Confirm the test lead is secure from making contact with anything conductive it will be connected to +24V. Connect the negative lead of the power supply to Terminal 2.ģ. Connect the postive lead of a 24V power supply along with a 6" test lead to Terminal 1 of the output terminal block.Ģ. Read and understand installation instructions before making any electrical connections to the PLC.ġ. ThingWorx Kepware Server offers drivers for hundreds of devices, making this step the only one that contains device-specific instructions. This guide uses an inexpensive Allen-Bradley Micro820 PLC as a demonstration. Consult the Troubleshooting step of this guide for more information. If significant time has passed while persuing this Learning Path, you may need to reinitialize them. NOTE: Both Rockwell Automation's Connected Components Workbench and ThingWorx Kepware Server are time-limited trials. In a later guide, we'll propogate that information further from ThingWorx Kepware Server into ThingWorx Foundation. In this continued step, you'll now connect an Allen-Bradley PLC to Connected Components Workbench and then to ThingWorx Kepware Server. Assuming you are using this guide as part of the Rockwell Automation Learning Path, then you have now completed each of the following installations: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |